Low moisture · For moisture-sensitive APIs

Microcrystalline Cellulose PH-112 — Low Moisture MCC

MCC PH-112 is a low-moisture grade of microcrystalline cellulose, with loss on drying held at NMT 2.0%. It flows like PH-102 in direct compression, but its low water content protects moisture-sensitive actives. Made in Bharuch, Gujarat, tested to IP and USP-NF, with a COA for every batch.

CAS 9004-34-6IP · USP-NFCOA with every batch
Microcrystalline cellulose PH-112 powder manufactured by Narmada Organics, Gujarat
Microcrystalline cellulose PH-112 · white, free-flowing powder
Overview

What is low moisture MCC PH-112?

MCC PH-112 is microcrystalline cellulose dried to a much lower moisture level than standard grades: loss on drying NMT 2.0%, against NMT 7.0% for PH-101, PH-102 and PH-200.

Its particle size sits in the same range as PH-102, so it keeps good flow for direct compression, but it adds far less water to the formulation.

Specification

MCC PH-112 specification (from COA, Nov 2026)

ParameterSpecificationTypical result
Retained on 60 meshNMT 8.0% m/m3%
Retained on 200 meshNLT 45.0% m/m59%
Bulk density0.32–0.40 g/mL0.33 g/mL
Loss on dryingNMT 2.0%1.32%
pH (supernatant)5.0–7.55.80
ConductivityNMT 75 µS/cm (USP); NMT 150 µS/cm (IP)50 µS/cm
Residue on ignitionNMT 0.1%0.06%
Water-soluble substancesNMT 0.25%0.16%
Assay97.0–102.0%99.84%
Degree of polymerisationNMT 350Complies
Heavy metals / ArsenicNMT 10 ppm / NMT 2 ppmComplies
Microbial (TAMC / TYMC)NMT 1000 / NMT 100 cfu/g; pathogens absentComplies

Limits and typical results are from Narmada Organics Certificates of Analysis. Pharmacopoeia: IP and USP-NF; BP and Ph. Eur. on request. Shelf life: see the expiry date on every COA and pack.

Applications

Applications of MCC PH-112

Moisture-sensitive APIs

Actives that degrade with moisture, such as some antibiotics, vitamins and effervescent actives.

Tight water-activity limits

Formulations that need low water activity for shelf-life stability.

Direct compression

Tablets that need PH-102-type flow with less moisture.

Capsule filling

Free-flowing, low-moisture fill for moisture-sensitive blends.

Compare

PH-102 vs PH-112

Both grades have the same sieve limits. The difference is moisture: PH-112 is NMT 2.0% against NMT 7.0% for MCC PH-102, and its bulk density range is slightly higher (0.32–0.40 g/mL).

Other grades: MCC PH-101 · MCC PH-102 · MCC PH-200 · All microcrystalline cellulose grades

Quality

Quality & compliance

  • Manufactured under GMP at our plant in Saykha GIDC, Bharuch, Gujarat
  • Drug Licence No. G/25/2713
  • Every batch tested to IP or USP-NF with a full Certificate of Analysis
  • COA, SDS and technical data sheet available on request
Logistics

Packaging & supply

Packed in HDPE bags with inner liners. Store in a cool, dry place in tightly closed containers. Minimum order quantity: 1 MT.

Domestic supply across India and export to Africa, Southeast Asia and the Middle East.

FAQ

MCC PH-112 FAQs

What is MCC PH-112?

A low-moisture grade of microcrystalline cellulose with loss on drying of NMT 2.0%.

What is the difference between PH-102 and PH-112?

They have the same sieve limits. PH-112 has much lower moisture (NMT 2.0% against NMT 7.0%) for moisture-sensitive drugs.

Which MCC grade is best for moisture-sensitive drugs?

MCC PH-112, because its loss on drying is NMT 2.0% compared with NMT 7.0% for standard grades.

Can I get a sample of MCC PH-112?

Yes. Request a sample with your pharmacopoeia (IP or USP-NF) and we will send it with its Certificate of Analysis.

Need MCC PH-112 for your next batch?

Tell us your quantity and pharmacopoeia. We will send a sample, a COA and a quotation.