- Home
- About Us
- Products
- Manufacturing
- Services
- Contact
MCC PH-200 is the large-particle grade of microcrystalline cellulose. The bigger particles give the best flow in our range, which keeps tablet weight uniform on high-speed rotary presses. Made in Bharuch, Gujarat, tested to IP and USP-NF, with a COA for every batch.

MCC PH-200 is the coarsest of our microcrystalline cellulose grades. Its large particles pour freely and fill the die evenly, even at high press speeds.
That makes it the grade to move to when PH-102 shows weight variation on fast rotary presses, or when the blend contains poor-flowing actives.
| Parameter | Specification | Typical result |
|---|---|---|
| Retained on 60 mesh | NLT 10.0% m/m | 19% |
| Retained on 100 mesh | NLT 50.0% m/m | 56% |
| Bulk density | 0.32–0.45 g/mL | 0.36 g/mL |
| Loss on drying | NMT 7.0% | 5.26% |
| pH (supernatant) | 5.0–7.5 | 6.30 |
| Conductivity | NMT 75 µS/cm (USP); NMT 150 µS/cm (IP) | 52 µS/cm |
| Residue on ignition | NMT 0.1% | 0.06% |
| Water-soluble substances | NMT 0.25% | 0.15% |
| Assay | 97.0–102.0% | 99.75% |
| Degree of polymerisation | NMT 350 | Complies |
| Heavy metals / Arsenic | NMT 10 ppm / NMT 2 ppm | Complies |
| Microbial (TAMC / TYMC) | NMT 1000 / NMT 100 cfu/g; pathogens absent | Complies |
Limits and typical results are from Narmada Organics Certificates of Analysis. Pharmacopoeia: IP and USP-NF; BP and Ph. Eur. on request. Shelf life: see the expiry date on every COA and pack.
Where PH-102 does not flow fast enough.
Free-flowing filler for bulky blends.
A free-flowing carrier for blends that need help with flow.
Helps reduce weight variation and tablet rejections.
Start with MCC PH-102. Move to PH-200 if you see weight variation at higher press speeds or with poor-flowing actives.
Other grades: MCC PH-101 · MCC PH-102 · MCC PH-112 · All microcrystalline cellulose grades
Packed in HDPE bags with inner liners. Store in a cool, dry place in tightly closed containers. Minimum order quantity: 1 MT.
Domestic supply across India and export to Africa, Southeast Asia and the Middle East.
High-speed direct compression where powder flow is the limiting factor.
On our COA, at least 10.0% is retained on a 60 mesh sieve and at least 50.0% on a 100 mesh sieve, so it is the coarsest of our grades.
Start with PH-102. Move to PH-200 if you see weight variation at higher press speeds.
Yes. Request a sample with your pharmacopoeia (IP or USP-NF) and we will send it with its Certificate of Analysis.
Tell us your quantity and pharmacopoeia. We will send a sample, a COA and a quotation.